If your iPhone 8 Plus will not turn on or is stuck on the Apple logo, try these DIY steps:

1. Force Restart
– Quickly press and release the Volume Up button.
– Quickly press and release the Volume Down button.
– Then press and hold the Side button until you see the Apple logo.
– If it restarts normally, the issue may have been a minor software crash.

2. Charge Your iPhone
– Plug your iPhone into a known working charger and cable.
– Let it charge for at least 30 minutes.
– Try the force restart steps again while it is connected to power.

3. Check for Physical Damage
– Inspect the charging port for dust, debris, or bent pins. Gently clean with a dry, soft brush or toothpick.
– Check for signs of liquid damage or a cracked screen that might indicate internal damage.

4. Restore with a Computer (Recovery Mode)
– Connect your iPhone to a computer with iTunes or Finder.
– Perform the force restart, but keep holding the Side button even after you see the Apple logo, until you see the recovery mode screen.
– On the computer, choose Update to reinstall iOS without erasing data. If Update fails, you may need to choose Restore, which can erase your data.

If your iPhone 8 Plus still will not turn on or remains stuck on the Apple logo after trying these steps, there may be a deeper hardware problem such as a failing battery, logic board issue, or damaged components. At that point, it is best to bring it to Instant Phone Repair in Howell MI for professional diagnosis and repair.

If your iPhone 8 Plus is not charging, try these quick DIY steps before seeking repair:

1. Check the power source
– Make sure the wall outlet or power strip works by plugging in another device.
– If using a USB port on a computer, try a different port or use a wall adapter instead.

2. Inspect the cable and charger
– Look for frayed, bent, or damaged areas on the charging cable.
– Try a different Apple-certified Lightning cable and charging block to rule out accessory issues.

3. Clean the charging port
– Power off your iPhone.
– Use a wooden or plastic toothpick to gently remove lint, dust, or debris from the Lightning port.
– Do not use metal tools or liquids, and be careful not to damage the pins inside.

4. Force restart your iPhone 8 Plus
– Quickly press and release the Volume Up button.
– Quickly press and release the Volume Down button.
– Press and hold the Side button until you see the Apple logo, then release.

5. Check for software updates
– If you can get a partial charge or use wireless charging, go to Settings > General > Software Update.
– Install any available iOS updates, as some charging issues can be software related.

6. Try wireless charging
– Place the iPhone 8 Plus on a compatible Qi wireless charger.
– If it charges wirelessly but not with a cable, the Lightning port may be damaged.

If your iPhone 8 Plus still will not charge after these steps, there may be an internal hardware issue such as a bad charging port, battery, or power IC. At that point, it is best to have a professional diagnosis and repair done by a shop like Instant Phone Repair in Howell MI.

If your iPhone 8 Plus is not charging or is charging slowly, start by checking the basics. Use the original Apple charging cable and wall adapter if possible, and try a different outlet to rule out power source issues. Inspect the Lightning cable for fraying, kinks, or bent connectors, and test with another known-good cable and charger.

Next, carefully clean the charging port. Power off the phone, then use a small, non-metal tool like a wooden or plastic toothpick to gently remove any visible dust or lint. Do not use liquids or metal objects in the port.

Restart the phone by holding the power button and following the on-screen prompts, then try charging again. Make sure you are not using the phone heavily while charging, as gaming or video streaming can slow down charging speeds. Also check for software updates under Settings > General > Software Update and install any available updates.

If the phone still will not charge normally after trying different chargers, cleaning the port, restarting, and updating, there may be a deeper hardware issue with the battery, charging port, or internal components. At that point, seeking professional repair service is recommended.

If your iPhone 8 Plus screen is frozen or not responding to touch, try these simple troubleshooting steps at home:

1. Remove case and clean screen
Take off any case or screen protector and gently wipe the screen with a soft, lint free cloth. Make sure your hands are clean and dry, and that the screen is free of moisture, dirt, or oils.

2. Force restart the iPhone
A force restart will not erase your data; it just reboots the device.
– Quickly press and release the Volume Up button.
– Quickly press and release the Volume Down button.
– Then press and hold the Side (Power) button until you see the Apple logo, then release.

3. Check for physical or liquid damage
Inspect the screen for cracks, deep scratches, or signs of liquid damage around the edges, charging port, and buttons. Damage in these areas can cause touch issues and will likely require professional repair.

4. Update iOS and apps
If the screen responds after a restart, go to Settings > General > Software Update and install any available updates. Also update your apps in the App Store. Software bugs can sometimes cause touch problems.

5. Reset settings (if touch is partially working)
If the screen is occasionally responsive, go to Settings > General > Transfer or Reset iPhone > Reset > Reset All Settings. This will reset system settings like Wi Fi and preferences, but will not delete your data. Test the touchscreen again afterward.

If your iPhone 8 Plus screen still will not respond after a force restart, or if there is visible screen or liquid damage, the digitizer or display assembly may be failing. In that case, it is best to stop troubleshooting at home and bring your device to Instant Phone Repair in Howell MI for a professional diagnosis and screen repair.

If your iPhone 8 Plus screen is not responding to touch, try these basic troubleshooting steps before seeking repair:

1. Remove case and screen protector
Take off any case or screen protector that might be pressing on the screen or interfering with touch. Wipe the screen with a clean, dry microfiber cloth to remove dirt, oils, or moisture.

2. Force restart the phone
A simple software glitch can cause touch issues. Try a force restart:
– Quickly press and release the Volume Up button
– Quickly press and release the Volume Down button
– Then press and hold the Side (Power) button until you see the Apple logo, then release

3. Check for physical damage
Inspect the screen and corners of the phone for cracks, bends, or signs of impact. Even a hairline crack or slight bend can affect touch function. If you see visible damage, DIY repair is not recommended and professional service is usually required.

4. Disconnect accessories
Unplug any cables or headphones and make sure the Lightning port is clean and dry. Sometimes connected accessories or moisture can affect the touch controller.

5. Boot into Safe Mode alternative (test after updates)
Make sure your iOS is updated:
– If touch works intermittently, go to Settings > General > Software Update and install the latest update.
– After updating, test the screen again. If touch only fails inside certain apps, uninstall or update those apps.

6. Test different screen areas
Open an app like Notes and try drawing or typing across the entire screen. If only certain zones do not respond, it usually points to a hardware issue with the display assembly.

If the screen is still completely unresponsive after a force restart, cleaning, and removing accessories, the problem is likely hardware related (damaged digitizer, loose connection, or failed screen). At that point, a professional inspection and screen replacement is usually the best solution.